DVD-E370
DVD-E365
DVD-E360K
DVD-E360
DVD-E350
DVD Player
User Manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at
ENGLISH
other than those specified herein may result in
hazardous radiation exposure.
format created by DivX, LLC, a subsidiary of
Rovi Corporation.
This is an official DivX Certified® device that
information and software tools to convert your
files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND : This DivX
Certified® device must be registered in order to
play purchased DivX Video-on-Demand (VOD)
movies. To obtain your registration code, locate
the DivX VOD section in your device setup
menu. Go to vod.divx.com for more information
on how to complete your registration.
“DivX Certified to play DivX video, including
premium content.”
Covered by one or more of the following U.S
patents : 7,295,673; 7,460,668; 7,515,710;
7,519,274.
(Only DVD-E370, E360K, E360)
This feature lets you to copy audio files from
disc to USB device into MP3 format. (Only
Audio CD (CD DA)).
CAUTION :
CLASS 3B VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. AVOID EXPOSURE TO
THE BEAM (IEC 60825-1).
Note
-
-
-
Discs which cannot be played with this
player.
THIS PRODUCT UTILIZES A LASER. USE
OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE. DO
NOT OPEN COVER AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
• DVD-ROM
• CD-ROM
• CDI
• DVD-RAM
• CDV
• CVD
Ability to play back may depend on recording
conditions.
• DVD-R, +R
Description
• CD-RW
Front Panel Controls
• DVD+RW, -RW (V mode)
The unit may not play certain CD-R, CD-RW
and DVD-R due to the disc type or recording
conditions.
7
CLASS 1
LASER PRODUCT
LASER PRODUKT
LASER LAITE
DVD-E360K
KLASSE 1
LUOKAN 1
KLASS 1
▼
▼
▼
▼
▼
▼
▼
LASER APPARAT
LÁSER CLASE 1
COPY PROTECTION
PRODUCTO
Many DVD discs are encoded with copy pro-
tection. Because of this, you should only con-
nect your DVD player directly to your TV, not to
a VCR. Connecting to a VCR results in a dis-
torted picture from copy-protected DVD discs.
Disc Markings
DVD-E370
DVD-E360
~
Play Region Number
▼
▼
▼
▼
▼
▼
PAL broadcast system in U.K,
France, Germany, etc.
This item incorporates copy protection technol-
ogy that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
PAL
Dolby Digital disc
Stereo disc
DVD-E350
STEREO
PROGRESSIVE SCAN OUTPUTS
(576p)
DVD-E365
▼
▼
▼
▼
▼
DIGITAL
SOUND
Digital Audio disc
MP3 disc
“CONSUMERS SHOULD NOTE THAT NOT
ALL HIGH DEFINITION TELEVISION SETS
ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS TO
BE DISPLAYED IN THE PICTURE, IN CASE
OF 576 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE
USER SWITCH THE CONNECTION TO THE
‘STANDARD DEFINITION’ OUTPUT. IF THERE
ARE QUESTIONS REGARDING YOUR TV SET
COMPATIBILITY WITH THIS MODEL 576p DVD
PLAYER, PLEASE CONTACT SAMSUNG’S
CUSTOMER SERVICE CENTER.”
Region Number
1. DISC TRAY
Place the disc here.
2. DISPLAY
Operation indicators are displayed here.
3. OPEN/CLOSE ( )
Press to open and close the disc tray.
4. PLAY/PAUSE (
Play or pause the disc.
5. POWER ON/OFF (
6. USB HOST (Only DVD-E370,
E360K, E360)
Both the DVD player and the discs are coded by
region. These regional codes must match in order
for the disc to play. If the codes does not match,
the disc will not play.
Connect digital still camera, MP3 player,
memory stick, Card reader other remov-
able storage devices.
7. MIC
The Region Number for this player is described
on the rear panel of the player.
)
(Only DVD-E360K)
Connect Microphone for karaoke func-
tions.
DivX Certification
)
DivX®, DivX Certified® and
associated logos are trade-
marks of Rovi Coorporation or its subsidiaries
and are used under license.
ABOUT DIVX VIDEO : DivX® is a digital video
Turn on/off and the player is turned on/
off.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a
CLASS 1 LASER product. Use of controls,
adjustments or performance of procedures
3
Tour of the Remote Control
Connections
Choosing a Connection
DVD-E365/DVD-E350
DVD-E360/DVD-E370
DVD-E360K
The following shows examples of connections commonly used to connect the DVD player with a TV
and other components.
Before Connecting the DVD Player
12
13
1
2
12
13
12
13
1
2
1
2
- Always turn off the DVD player, TV, and other components before you connect or disconnect
any cables.
- Refer to the user’s manual of the additional components you are connecting for more informa
tion on those particular components.
3
14
15
14
15
23
15
3
22
5
6
7
3
22
5
6
7
4
5
6
16
16
16
7
17
18
17
18
17
18
A. Connecting to a TV (For Video)
8
8
8
9
1. Using video/audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT terminals
on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN terminals of TV.
2. Turn on the DVD player and TV.
9
9
10
19
20
21
10
19
21
10
19
21
11
11
11
3. Press the input selector on your TV remote control until the Video signal from the DVD player
appears on the TV screen.
Note
-
-
-
Noise may be generated if the audio cable is too close to the power cable.
If you want to connect to an Amplifier, please refer to the Amplifier connection page.
The number and position of terminals can vary depending on your TV set. Please refer to the user’s
manual of the TV.
If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of
the DVD player.
1. DVD POWER Button
Turns the power on or off.
2. REPEAT Button
13. VIDEO SEL. Button
Changes video output mode.
14. USB Button
-
-
Allows you to repeat play a title, chapter,
track, or disc.
(Only DVD-E370,E360K,E360)
To change device which access to USB
device.
If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video
Output mode changes in the following sequence: (I-SCAN ➝ P-SCAN)
3. DISC MENU Button
Brings up the Disc menu.
4. RECORD Button
(Only DVD-E360K)
Use to Karaoke recording.
15. MARKER Button
16. PLAY Button (
B. Connection to a TV (Interlace/Progressive)
)
Begins disc play.
1. Using component video cables, connect the COMPONENT VIDEO OUT terminal on the rear of
the DVD player to the COMPONENT IN terminal of TV.
2. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the
DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV.
3. Press the input selector on your TV remote control until the Component signal from the DVD
player appears on the TV screen.
17. SUBTITLE/(π) Button
18. RETURN Button
Returns to a previous menu
19. TITLE MENU Button (®)
Brings up the Title menu.
20. KARAOKE (†) Button
(Only DVD-E360K)
To acces karaoke menu (keycon, mic volume,
echo).
21. INFO Button
Used to displays playback info banner.
22. REPEAT A-B Button
(Only DVD-E370, E365, E360,
E350)
Allows you to repeat A-B disc.
23. ZOOM Button
5. SEARCH Buttons (
/
)
Allows you to search forward/backward
through a disc.
6. STOP Button (
To stop the disc
7. SKIP Buttons (
)
/
)
4. Set the Video Output to I-SCAN/P-SCAN in the Display Setup menu. You can use the VIDEO
SEL. button to change the Video Output mode.
Use to skip the title, chapter or track.
8. MENU Button
Brings up the DVD player’s menu.
Note
9. ENTER/π/†,√/® Buttons
This button functions as a toggle switch.
10. AUDIO Button (√)
- What is “Progressive Scan”?
Progressive scan has twice as many scanning lines as the interlace output method has. Progressive
scanning method can provide better and clearer picture quality.
Use this button to access various audio
functions on a disc
.
C.Connection to an Audio System (2 Channel Amplifier, Dolby Digital,
or MPEG2 )
11. TOOLS Button
Displays the current disc mode. It also lets
you access the Display function.
12. OPEN/CLOSE ( ) Button
To open and close the disc tray.
4
(Only DVD-E365, E350)
Enlarges the DVD Picture.
1. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the
DVD player to the AUDIO (red and white) IN terminals of the Amplifier. If using a coaxial cable,
connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the
DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.
2. Using the video signal cable(s), connect the VIDEO, COMPONENT OUT terminals on the rear of
the DVD player to the VIDEO, COMPONENT IN terminals of your TV
DVD-E360K
DVD-E360
DVD-E350
2-Channel stereo amplifier or Dolby digital
red
white
blanco
coaxial cable
◄ C
3. Turn on the DVD player, TV, and Amplifier.
4. Press the input select button of the Amplifier to select external input in order to hear sound
from the DVD player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
audio cable
cable de audio
green
blue
white
red
white
D. Connection to a 5.1CH Analog Amplifier (ONLY DVD-E365, E370)
1. If using audio cables for 5.1 CH Analog
Amplifier (not included) connect the 5.1CH
ANALOG AUDIO OUT terminals on the rear of
the DVD player to the 5.1CH ANALOG AUDIO
IN terminals of the 5.1CH Analog Amplifier.
2. Using the video signal cable(s), connect
the VIDEO or COMPONENT terminals on
the rear of the DVD player to the VIDEO
or COMPONENT terminals of your TV as
rojo
red
yellow
video cable
◄ A
audio cable
red
component
cable
◄ B
yellow
blue
red
white
green
Front (RH)
Rear (RH)
Front (LH)
Rear (LH)
Center
described on pages.
D
3. Turn on the DVD player, TV, and Amplifier.
4. Press the input select button of the Amplifier
to select external input in order to hear sound
from the DVD player.
Subwoofer
DVD-E370
DVD-E365
2-Channel stereo amplifier or
Dolby digital
red white
coaxial cable
◄ C
audio cable
blue
green
white
red
white
Rojo
yellow
audio cable
video cable◄ A
component
cable
◄ B
red blue green
yellow
red white
5
Using the Display Function
Basic functions
Playing a Disc
When Playing a DVD/VCD/MPEG4
1. During play, press the TOOLS button on the remote control.
2. Press the π/† buttons to select the desired item.
3. Press the √/® buttons to make the desired setup.
4. To make the screen disappear, press the TOOLS button again.
Before Play
- Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on the TV
remote control.
- If you connected an external Audio System, turn on your Audio System and set it to the cor
rect Audio Input.
The functions when using the Display function are listed in the table below.
To access the desired title when there is more than one in the disc. For example, if there is
more than one movie on a DVD, each movie will be identified.
After plugging in the player, the first time you press the DVD POWER button, this screen comes up:
If you want to select a language, press the π/† button, and then press the ENTER button. (This
screen will only appear when you plug in the player for the first time.)If the language for the startup
screen is not set, the set-tings may change whenever you turn the power on or off. Therefore, make
sure that you select the language you want to use.Once you select a menu language, you can
change it by pressing the ®|| button on the front panel of the unit for more than 5 seconds with no
disc in the unit. Then the SELECT MENU LANGUAGE window appears again where you can reset
your preferred language.
Most DVD discs are recorded in chapters so that you can quickly find a specific passage.
Allows playback of the film from a desired time. You must enter the starting time as a reference. The time
search function does not operate on some discs.
Lets you select the soundtrack language for a film. A DVD disc can have up to eight different soundtracks.
Lets you select the subtitle language or, if you prefer, turn off subtitles. A DVD disc can have up to 32 differ-
ent sets of subtitles, each in a different language.
Using the Search and Skip Functions
During play, you can search quickly through a chapter or track, and use the skip function to jump to
the next selection.
E
Z
Lets you choose the EZ-View type
Select to activate the Zoom function.
Searching through a Chapter or Track
During play, press the SEARCH (k or K) button on the remote control for more than 1 second.
Some DVDs have scenes that have been recorded at multiple angles. Use the Angle function to view a
scene at one of those angles.
Note
-
DVD
CD
2X, 4X, 8X, 16X, 32X
2X, 4X, 8X, 16X, 32X
4X, 8X
The speed marked in this function may be different from the
actual playback speed.
No sound is hearing during search mode (Except CD).
Using the Disc and Title Menu
VCD
-
During the playback of a DVD disc, press the DISC MENU/TITLE MENU button on the remote control.
Skipping Tracks
Note
During play, press the SKIP (|k or K|) button.
-
-
-
Depending on a disc, the Disc Menu/Title Menu may not work.
You can also use the Disc Menu, using the DISC MENU button on the remote control.
Title Menu will only be displayed if there are at least two titles in the disc.
-
-
-
When playing a DVD, if you press the SKIP (K|) button, it moves to the next chapter. If you
press the SKIP (|k) button, it moves to the beginning of the chapter. One more press makes it
move to the beginning of the previous chapter.
Repeat Play
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
When playing a VCD, if you press the SKIP (K|) button, it moves to the next track. If you press
the SKIP (|k) button, it moves to the beginning of the track. One more press makes it move to
the beginning of the previous track.
When playing a DVD/VCD
If a track exceeds 15 minutes when playing a VCD and you press the K| button, it moves for-
ward 5 minutes. If you press the |k button, it moves to the beginning of the track. One more
press makes it move to the beginning of the previous track.
1. Press the REPEAT button on the remote control. Repeat screen appears.
2. Press the REPEAT or π/† button to change playback mode. DVD repeats play by chapter or
title.
- Off.
- Title : repeats the title that is playing.
- Chapter : repeats the chapter that is playing.
- Repeat A-B
6
Using the A-B Repeat function (Only DVD-E360K)
Note
This function may behave differently depending on the type of disc.
1. Press the REPEAT button on the remote control. The repeat screen appears.
2. Press the π/† button to select the REPEAT A-B and then press ENTER.
3. Press the ENTER at the point where you want repeat play to start (A).
4. Press the ENTER at the point where you want repeat play to start (B).
Selecting the Audio Language
You can select a desired audio language quickly and easily with the AUDIO button.
Using the AUDIO (√) button (DVD/VCD/MPEG4)
Using the A-B Repeat function (Only DVD-E370,E365, E360,E530)
1. During play, Press the AUDIO (√) button. Change the audio language by pressing the π/†
button.
- The audio languages are represented by abbreviations.
2. To remove the AUDIO icon, press the RETURN button.
1. Press the REPEAT A-B button on the remote control.
2.Press the REPEAT A-B button at the point where you want repeat play to start (A).
3.Press the REPEAT A-B button at the point where you want the repeat play to stop (B).
3. To return to normal play, press the REPEAT A-B button until the display shows Repeat : Off.
Note
- This function depends on audio languages are encoded on the disc and may not work.
- A DVD disc can contain up to 8 audio languages.
Note
-
A-B REPEAT allows you to set point (B) directly after point (A) has been set.
- Depending on a disc, the Repeat function may not work.
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the SUBTITLE/(π) button.
Slow Play
This feature allows you slowly to repeat scenes con-taining sports, dancing, musical instruments
being played etc., so you can study them more closely.
Using the SUBTITLE (π) button (DVD/MPEG4)
1. During play, Press the SUBTITLE (π) button.
2. Press the SUBTITLE (π) or π/† button to change the language. Each time you press the
SUBTITLE (π) or π/† button, the language changes.
3. To remove the SUBTITLE icon, press the RETURN button.
When playing a DVD
1. During play, press the PLAY (
)
button.
2. Press the SEARCH (k/K) button to choose the play speed between 1/2, 1/4, 1/8,1/16 and so
Note
on. If you want to go normal play press PLAY button.
- The subtitle languages are represented by abbreviations.
- You have to change the desired subtitle in the Disc Menu, according to discs. Press the DISC MENU
button.
- This function depends on what subtitles are encoded on the disc and may not work on all DVDs.
- A DVD disc can contain up to 32 subtitle languages.
Advanced functions
Adjusting the Aspect Ratio (EZ View)
To play back using aspect ratio (DVD)
Changing the Camera Angle
When a DVD contains multiple angles of a particular scene, you can use the ANGLE function.
1. During play, press the TOOLS button on the remote control.
E
Z
2. Press the π/† buttons to select
icon. Each time you press the √/® buttons, the screen size
changes. For graphics of the screen sizes and lists of the sequences in which the sizes change,
see the next column.
Using the ANGLE function (DVD)
If the disc contains multiple angles, the ANGLE appears on the screen.
3. Press the RETURN button to exit EZ View.
1. During play, press the TOOLS button on the remote control.
If you are using a 16:9 TV
If you are using a 4:3 TV
2. Press the π/† buttons to select
icon. When the angle screen is displayed, press the √/®
buttons on the remote control to select the desired angle option.
For 16:9 aspect ratio discs
- WIDE SCREEN
- SCREEN FIT
For 16:9 aspect ratio discs
- 4:3 Letter Box
- 4:3 Pan Scan
- SCREEN FIT
- ZOOM FIT
Using the Bookmark Function
This feature lets you bookmark sections of a DVD or VCD (Menu Off mode) so you can quickly find
them at a later time.
- ZOOM FIT
For 4:3 aspect ratio discs
- Normal Wide
- SCREEN FIT
- ZOOM FIT
- Vertical Fit
Using the Bookmark Function (DVD/VCD)
For 4:3 aspect ratio discs
- Normal Screen
- SCREEN FIT
1. During play, press the MARKER button on the remote control.
2. When you reach the scene you want to mark, press the √/® or π/† buttons, and then press
MARKER button. Up to 12 scenes may be marked at a time.
7
- ZOOM FIT
Note
MP3/WMA/CD Audio Playback
1. Open the disc tray. Place the disc on the tray. Close the tray.
2. Press the √/® buttons to select a Music folder, and then press ENTER. Press the π/† buttons
to select a song file, and then press the ENTER to begin playback of the song.
-
Depending on a disc, the Bookmark function may not work.
Recalling a Marked Scene
1. During play, press the MARKER button on the remote control.
2. Press the √/® orπ/† buttons to select a marked scene.
Repeat/Random playback
3. Press the PLAY ( ) button to skip to the marked scene.
Press the REPEAT button to change the playback mode. There are four modes, such as Off, Track,
Folder and Random.
Clearing a Bookmark
1. During play, press the MARKER button on the remote control.
2. Press the √/® orπ/† buttons to select the bookmark number you want to delete.
3. Press the ENTER button to delete a bookmark number.
- Off ( ): Normal Playback
1
- Track ( ): Repeats the current song file.
- Folder ( ): Repeats the song files which have the same extension in the current folder.
- Random ( ): Song files which have the same extension will be played in random order.
To resume normal play, press the REPEAT button until the Repeat : Off.
Using the Zoom Function
- Using the Zoom Function (DVD-E365, E350)
CD-R MP3/WMA file
1. During play or pause mode, press the ZOOM button on the remote control.
When you record MP3 or WMA files on CD-R, please refer to the following.
- Using the Zoom Function (DVD-E370,E360K,E360)
-
-
-
Your MP3 or WMA files should be ISO 9660 or JOLIET format.
ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft’s DOS and Windows, and with
Apple’s Mac. This format is the most widely used.
1. During play or pause mode, press the TOOLS buttons on the remote control.
2. Press the π/† buttons to select
icon, then press the ENTER button.
When naming your MP3 or WMA files, do not exceed 8 characters, and enter “.mp3, .wma” as the file extension.
General name format : Title.mp3. or Title.wma. When composing your title, make sure that you use 8 char-
acters or less, have no spaces in the name, and avoid the use of special characters including: (.,/,\,=,+).
Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.
Sound quality with MP3 files basically depends on the rate of compression/decompression you choose.
Getting CD audio sound requires an analog/digital sampling rate, that is conversion to MP3 format, of at
least 128 Kbps and up to 160 Kbps. However, choosing higher rates, like 192 Kbps or more, only rarely give
better sound quality. Conversely, files with decompression rates below 128 Kbps will not be played prop-
erly.
Use a decompression transfer rate of at least 64Kbps when recording WMA files.
Sound quality with WMA files basically depends on the rate of compression/decompression you choose.
Getting CD audio sound requires an analog/digital sampling rate, that is conversion to WMA format, of
at least 64Kbps and up to 192Kbps. Conversely, files with decompression rates below 64Kbps or over
192Kbps will not be played properly. Sampling rate that can be supported for WMA files is > 30Khz.
Do not try recording copyright protected MP3 files.
- During DVD play, press ENTER to zoom in 1X/2X/3X/4X Normal in order.
Clips Menu for MP3/WMA/JPEG/MPEG4/CD Audio
CD Audio or discs with MP3/WMA/JPEG/MPEG4 contain individual songs and/or pictures that can
be organized into folders as shown below. They are similar to how you use your computer to put
files into different folders.
Videos
\
1/2
Pages
To go access these folders and the files in them, follow these steps :
1. Open the disc tray. Place the disc on the tray.
-
2. Close the tray. The tray closes and the Parent Folder Menu screen
appears (top screen image.) Parent folders contain all the Peer folders
that have the same kind of content: music, video, photos, etc.
3. Press the √/® buttons to select the Parent folder of your choice, and
CD
Pages
Move
Return
then press the ENTER. A screen displaying the Peer folders appears. The Peer folders contain
all the folders with the same kind of content (video, music, photos, etc.) that are in the Parent
folder.
-
Certain “secured” files are encrypted and code protected to prevent illegal copying. These files are of the
TM
TM
following types: Windows Media (registered trade mark of Microsoft Inc) and SDMI (registered trade mark
of The SDMI Foundation). You cannot copy such files.
Folder Selection
-
Important:
The above recommendations cannot be taken as a guarantee that the DVD player will play MP3 recordings,
or as an assurance of sound quality. You should note that certain technologies and methods for MP3 file
recording on CD-Rs prevent optimal playback of these files on your DVD player (degraded sound quality
and in some cases, inability of the player to read the files).
The folder can be selected both in Stop or Play mode.
-
To select the Parent Folder
Press the RETURN button to go to parent folder, or press the π/† buttons to select “..” and
press ENTER to go to the parent folder.
-
This unit can play a maximum of 500 files and 500 folders per disc.
-
-
To select the Peer Folder
Press the π/† buttons to select the desired folder, then press ENTER.
To select the Sub-Folder
Press the π/† buttons to select the desired folder, then press ENTER.
8
Qpel and GMC are also supported.)
Possible warning messages that may appear
when trying to play DivX/AVI files are :
1. No Authorization
- File with bad registration code.
2. Unsupported Codec
- Files with certain Codec Types, Versions
(ex. MP4, AFS and other proprietary
codecs) are not suppoerted by this player.
3. Unsupported Resolution
MPEG4 Playback
DVD-RW & DVD+R
MPEG4 Play Function
Format that support for DivX file :
- Basic DivX format DivX3.11 / 4.12/ 5.x
- DivX Pro
- File format : *.avi, *.div, *.divx.
This unit supports all resolutions up to maximum below.
AVI files are used to contain the audio and video data. Only AVI format files with the “.avi” exten-
sions can be played.
1. Open the disc tray. Place the disc on the tray. Close the tray.
2. Press the √/® buttons to select a Videos Menu , then press the ENTER. Press the π/† to
select an avi file (DivX) then press the ENTER.
DivX5
- Files containing resolutions higher than the
player’s specification are not supported.
Repeat and Repeat A-B playback
720 x 480 @30fps
720 x 576 @25fps:
1. Press the REPEAT button , then press REPEAT or π/† buttons to change playback mode.
There are 3 modes, such as Off, Title and Folder.
- Off : No Repeat mode.
Maximum bitrate : 4Mbps
Note
•
- Title : repeats the title that is playing.
- Folder : repeats the AVI files which have the same extension in the current folder.
- Repeat A-B
The resolution that can be supported by DVD-E370,E360K,E360,E365,E350 model up to 720 x 480
@30 frames/ 720 x 576 @25 frames.
•
This unit supports CD-R/RW written in MPEG4 in accordance with the “ISO9660 format”.
Repeat A-B playback (Only DVD-E360K)
1. Press the REPEAT button on the remote control. The repeat screen appears.
2. Press the π/† button to select the REPEAT A-B and then press ENTER.
3. Press the ENTER at the point where you want repeat play to start (A).
4. Press the ENTER at the point where you want repeat play to start (B).
Playing Media Files Using the USB Host feature
(Only DVD-E370, E360K, E360)
You can enjoy the media files such as pictures, movies andtunes saved in an MP3 player, USB
memory or digital camera in high audio by connecting the storage device to the USB port of the
DVD Player.
Repeat A-B playback (Only DVD-E370, E360, E365, E350)
1. Press the REPEAT A-B button on the remote control.
2. Press the REPEAT A-B button at the point where you want repeat play to start (A).
3. Press the REPEAT A-B button at the point where you want the repeat play to stop (B)
Using the USB HOST feature
1. Connect the USB device to the USB port on the front of the unit.
2. The USB Menu screen appears. Press the √/® button to select Menu, then press ENTER.
3. Press the π/† buttons to select a file in the USB device. Press ENTER to Open the file.
- To return to normal play, press the REPEAT A-B button until the display shows Repeat : Off
.
Note
Switching Between DVD and USB
-
A-B REPEAT allow you to set point (B) directly after point (A) has been set.
If you have a disk in the player, and you are viewing or listening to files on a USB device, or the
USB Menu is on the screen, you can switch from the USB device to the disc by pressing the USB
button on the remote.
Also, you can switch from the disc to the USB device by pressing the USB button on the remote.
“USB loading...” appears on the screen, and then the USB Menu appears.
MPEG4 Function Description
Function
Description
Skip
(|k or K|)
During play, press the |k or K| button, it moves to next or previous track.
Note
•
During play, press the SEARCH (k or K) button and press again to search at
a faster speed. Allows you to search at a faster speed in an AVI file. (2X, 4X, 8X,
16X, 32X)
Depends on the file size and clip duration, loading time on USB may take longer than using CD or DVD
media.
Search
(k or K)
Safe USB Removal
1. Press the USB button to return to disc mode or the main screen.
2. Press the STOP (■) button
During play, press the PLAY ( ( ) button, and then press the SEARCH (K) button
to view video at a slower speed. (1/2, 1/4, 1/8, 1/16)
Slow Motion Play
ZOOM
X1/X2/X3/X4/Normal in order
3. Remove the USB cable.
Skip Forward/Back
- These functions may not work depending on MPEG4 file.
During playback, press the (|k/K|) button.
CD-R AVI fileThis
- DivX 4 contents (Based on MPEG-4 Simple
Profile)
- DivX 5 contents (MPEG-4 simple profile plus
additional features such as bi-directional frames.
•
•
When there is more than one file, when you press the K| button, the next file is selected.
unit can play the following video compression
formats within the AVI file format:
- DivX 3.11 contents
When there is more than one file, when you press the |k button, the previous file is selected.
9
Fast playback
Note
- To cancel copying in progress, press the ENTER button.
- To return to the CDDA screen, press the TOOLS button again.
- While the CD is being ripped, the player will automatically enter stop mode.
- The ripping process is 2.6 times of normal speed.
- The DVD player can only rip Audio CD (CD DA) discs.
- The USB button does not work while you’re in the Ripping menu.
- CD ripping function may not supported for some MP3 players device.
To play back the disc at a faster speed, press (k/K) during playback
•
Each time you press either button, the playback speed will change as follows : 2X ➞ 4X ➞ 8X
➞ 16X ➞ 32X.
Compatible Devices
1. USB devices that support USB Mass Storage v1.0.(USB devices that operate as a removable disk in
Windows (2000 or later) without additional driver installation.)
2. MP3 Player: Flash type MP3 player.
3. Digital camera: Cameras that support USB Mass Storage v1.0.
• Cameras that operate as a removable disk in Windows (2000 or later) without additional driver
installation.
Picture CD Playback
1. Select the desired folder.
4. USB Flash Drive: Devices that support USB2.0 or USB1.1.
2. Press the π/† buttons to select a Picture file in the clips menu and then press the ENTER button.
• You may experience a difference in playback quality when you connect a USB1.1 device.
5. USB card Reader: One slot USB card reader and Multi slot USB card reader
• Depending on the manufacturer. the USB card reader may not be supported.
Note
- Press the STOP button to return to the clips menu.
- When playing a Kodak Picture CD, the unit displays the Photo directly, not the clips menu.
•
If you install multiple memory devices into a multi card reader, you may experience problems.
6. If you use a USB extension cable, the USB device might not be recognized.
Rotation
Note
-
-
-
-
Press the TOOLS button to select Rotate, and then press the ENTER button.
•
•
CBI (Control/Bulk/Interrupt) is not supported.
Digital Cameras that use PTP protocol or require additional program installation when connected to
a PC are not supported.
Each time the √/® buttons are pressed, the picture rotates 90 degrees clockwise.
Each time the π button is pressed, the picture will reverse to the upside down to show a mirror image.
Each time the † button is pressed, the picture will reverse to the right side to show a mirror image.
•
•
•
A device using NTFS file system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) file
system is supported.)
Some MP3 players, when connected to this product,may not operate depending on the sector size
of their file system.
The USB HOST function is not supported if a product that transfers media files by its manufacturer-
specific program is connected.
Zoom
-
-
-
Press the TOOLS button to select Zoom, and then press the ENTER button.
Each time ENTER button is pressed, the picture is enlarged. Zoom mode : X1-X2-X3-X4-X1.
Press the √/®/π/† buttons to move the enlarged picture so you can view different portions.
•
•
•
Does not operate with Janus enabled MTP(Media Transfer Protocol) devices.
The USB host function of this product does not support all USB devices.
The USB Host does not support USB Hard Disc Drives (HDD).
Slide Show
-
When you press the PLAY at JPEG file, it will go to full screen mode and automatically slide
show.
Note
-
-
CD Ripping (Only DVD-E370, E360K, E360)
This feature allows you to copy audio files from a disc to a USB device in MP3 format.
Depending on a file size, the amount of time between each picture may be different from the manual.
If you don’t press any button, the slide show will start automatically in about 10 seconds by default.
Open the dics tray. Place the Audio CD(CD DA) disc on the tray, and close the tray. Connect the
USB device to the USB port on the front of the unit. Press the USB button.
CD-R JPEG Disc
-
-
Only files with the “.jpg” and “.JPG” extensions can be played.
If the disc is not closed, it will take longer to start playing and not all of the recorded files may be
played.
1. Press the TOOLS button to display the Ripping screen.
2. Press the π/† buttons, then press the ENTER button to select files for ripping.
-
To deselect files, press ENTER button again.
-
-
Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces
or special characters (. / = +).
3. Press the √ and † button to select START, then press the ENTER button begin ripping.
The Ripping menu contain the following buttons :
-
-
Mode (Fast/Normal)
Bitrate, press ENTER to change : 128kbps ➞ 192kbps ➞ 128kbps.
• Standard : 128kbps
-
Only a consecutively written multi-session disc can be played. If there is a blank segment in the multi-
session disc, the disc can be played only up to the blank segment.
A maximum of 500 images can be stored on a single CD.
Kodak Picture CDs are recommended.
When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
Kodak Picture CD: The JPEG files in the pictures folder can be played automatically.
-
-
-
-
• Better Quality : 192kbps
-
-
Device selection, press ENTER to change between partitions on the USB device (max 4).
Select - Unselect, press ENTER to change from Select all (files) or Select none.
10
2. Choose My Karaoke setting in Setting --> Audio --> My Karaoke and then select one of three enable
mode :
- Original Vocal : This setting will keep the original vocal sound.
- Min. Reduction : this setting reduce the main vocals sound sligthly.
- Max. Reduction : This setting will reduce the main vocals sound greatly
3. Insert and play DVD or VCD media, this feature only for VCD.DVD non karaoke type.
-
-
-
-
-
Konica Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
Fuji Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
QSS Picture CD: The unit may not play QSS Picture CD.
If the number of files in 1 Disc is over 500, only 500 JPEG files can be played.
If the number of folders in 1 Disc is over 500, only JPEG files in 500 folders can be played.
Karaoke functions (Only DVD-E360K)
Karaoke Functions
Note
1. Feature will disabled when :
- Removing the microphone, or
Operation Sequence
- Changing “My Karaoke” settings to “Original Vocals” or
- Playing Karaoke audio, or
1. Connect the terminals Mixed Audio Out to TV or Amplifier.
- Playing non supported file type (ex : *.avi: *.mp3; *.divx; etc)
2. No pop-up notification when feature disabled.
2. Connect the microphone plug to Mic (microphone) and set Karaoke score to On. When MIC is
connected and Karaoke score is On, the karaoke functions can be used.
Echo/Microphone Volume/Key Control (Tone control)
1. Play the karaoke disc containing the songs you want.
- Press the KARAOKE (†) button, and then press π/† to select ECHO, VOL or KEY.
2. Press the √/® buttons to change the desired item.
Changing setup menu
Using the Setup Menu
Karaoke Scoring (Score)
The Setup menu lets you customize your DVD player by allowing you to select various language
preferences, set up a parental level, even adjust the player to the type of television screen you
have.
The scoring will appear as :
1. The microphone is connected and Karaoke score is On.
2. At the end of each chapter/title of karaoke disc.
1. With the unit in Stop mode, press the MENU button on the remote control. Press the √/® but-
tons to select SETTINGS, then press the ENTER button.
2. Press the π/† buttons to select a Setup Menu, then press the ® or ENTER to bring up the
sub-menu.
- If the DVD karaoke have any information on the scoring drive.
- In case of VCD, the device can not differentiate between hard karaoke or movies, then the
scoring will always appear.
3. Karaoke score will appear at the end of time for each chapter/title for about 6s.
3. Press the π/† buttons to select a sub-menu option, then press the ® or ENTER.
4. To make the setup screen disappear after setting up, press the RETURN button.
Karaoke Sound Recording
1. Insert USB storage media into USB jack and then connected the microphone plug to Mic.
2. To star karaoke recording, choose one of VCD/DVD/SVCD file, then press RECORD button.
3. When recording, user can only press STOP button and PAUSE button to cancel the recording.
4. If user do cancelation, then file result will be saved.
Setting Up the Display Options
Display options enable you to set various video functions of the player.
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select
SETTINGS, then press the ENTER button.
Note
2. Press the π/† buttons to select DISPLAY, then press the ® or ENTER button.
3. Press the π/† buttons to select the desired item, then press the ® or ENTER button.
- If you hear feedback(squealing or howling) while using the karaoke feature, move the microphone
away from the speakers or turn down the microphone volume or the speaker volume.
- When playing MP3, WMA and LPCM disc, the karaoke functions will not operate.
- When the MIC is connected, Digital Out does not work.
- The MIC sound outputs only from Analog Audio Out.
- If MIC is connected to the MIC jack on the front panel, 5.1CH audio will be changed in to 2 CH audio
automatically, this condition can’t be change unless the MIC is plugged out.
Note
• Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If
Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan set-
tings in the TV’s menu system.
• If Video Output is set incorrectly, the screen may be blocked.
• When the resolution is changed during playback, it may take a few seconds for a normal
image to appear.
MY KARAOKE
My Karaoke is the feature that makes non karaoke VCD/DVD can be used like karaoke disc, by
removing lead singer vocal sound.
Using the My Karaoke feature :
1. Connect the microphone.
11
Setting Up the Audio Options
Audio Options allows you to setup the audio device and sound status settings depending on the audio
system in use.
Setting Up the System Options
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS,
then press the ENTER button.
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTING,
then press the ENTER button.
2. Press the π/† buttons to select SYSTEM, then press the ® or ENTER button.
3. Press the π/† buttons to select the desired item, then press the ® or ENTER button.
2. Press the π/† buttons to select AUDIO, then press the ® or ENTER button.
3. Press the π/† buttons to select the desired item, then press the ® or ENTER button.
Setting Up the Language Features
Note :
If you set the player menu, disc menu, audio and subtitle language in advance, they will come up
automatically every time you watch a movie.
- When play a disc that has MPEG Audio and you have Bitstream selected in the Audio Options menu,
the Digital Audio jack may not output audio
- There is no analogue audio output when you play a sound disc.
- Even when PCM Down sampling is Off
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS,
then press the ENTER button.
2. Press the π/† buttons to select LANGUAGE, then press the ® or ENTER button.
3. Press the π/† buttons to select the desired language, then press the ® or ENTER button.
• Some discs will only output down sampled audio through the digital outputs.
Note
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trade-
marks of Dolby Laboratories.
-The language is selected and the screen returns to Language Setup menu.
-To make the setup menu disappear, press the MENU button.
-If the selected language is not recorded on the disc, the original pre-recorded language is selected.
-Select “Original” if you want the defaultsoundtrack language to be the original language the disc is
recorded in.
Surround Sound Speaker Setup (Only DVD-E370, E365)
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTING,
then press the ENTER button.
2. Press the π/† buttons to select AUDIO, then press the ® or ENTER button.
3. Press the π/† buttons to select Speaker Setup, then press the ® or ENTER button.
4. Press the π/†/√/® buttons to select the desired item, then press the ENTER button to set
the speaker.
-Select “Automatic” if you want the subtitle language to be the same as the language selected as the
audio language.
-
Some discs may not contain the language you select as your initial language; in that case the disc will use
its original language setting.
Note
Setting Up the Security Options
To make the setup menu disappear, press the MENU button.
The Parental Control function works in conjunction with DVDs that have been assigned a rating, which
helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.
Setting up Test
The test output signals come clockwise starting from the Front Speaker(L).
Adjust Channel Balance so that speakers output equally in your room.
Setting Up the Rating Level
FRONT(L) ➝ CENTER ➝ FRONT(R) ➝ SURROUND(R) ➝ SURROUND(L) ➝ SUBWOOFER
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS,
and then press the ENTER button.
Note
2. Press the π/† buttons to select SECURITY, and then press the ® or ENTER button.
3. The first time you access security, you must enter the default password: 0000. To enter the default
password, highlight 0 on the screen and press the ENTER button 4 times. To change the default
password.
4. Press the π/† buttons to select PARENTAL, and then press the ® or ENTER button.
5. Press the π/† buttons to select the rating level you want, and then press the ENTER button.
The higher the rating level, the more mature the allowable content.
- If you select the Kid Safe level, discs rated level 2 or higher will not play unless you enter the pass
word.
To make the Setup menu disappear or return to menu screen during set up, press RETURN
button.
• The subwoofer test output signal is lower than the other speakers.
• The MPEG Multichannel logo is a trademark registered by PHILIPS Corporation.
• If you set Front (L, R) “Small”, LFE (Subwoofer) is set “On” automatically.
12
Security Levels :
Reference
Troubleshooting
❶
❷
❸
❹
KID SAFE
G (General Audiences) : All Ages Admitted
PG (Parental Guidance suggested) : Some material may not be suitable for young children.
PG 13 (PG-13 Parents strongly cautioned) : Some material may be inapproriate for children under
13.
Before requesting service (troubleshooting), please check the following.
❺
PGR (Parental Guidance Recommended) : These are not necessarily unsuitable for children, but
Problem
Action
viewer discretion is advised, and parents and guardians are encouraged to supervise younger view-
ers.
❻
❼
❽
R (Restricted) : Under 17 requires accompanying adult
NC17 (NC-17) : No one 17 and under admitted.
ADULT
• Press the ®|| button (in front panel) for more than 5 seconds under no
disc inside. All setting will revert to factory settings.
The screen is blocked.
Note:
• Press the ®|| button (in front panel) for more than 5 seconds under no
disc inside. All setings including the password will revert to the factory
settings. Don't use this unless absolutely necessary.
- If you have forgotten your password, see “Forgot Password” in the Troubleshooting Guide.
Forgot password.
Changing the Password
To change the password, follow these steps:
• 5.1 channel sound is reproduced only when the following conditions are met. :
1) The DVD player is connected with the proper Amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the “5.1 ch” mark on the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
1. On the Settings Menu, Select Security, and then press the ENTER button.
2. Enter the current 4 digit password. If you have never changed the password, enter the default
password: 0000. To enter a number, use the √/®/π/† buttons to highlight a number, and then
press the ENTER button.
3. Select Change Password, and then press the ENTER button.
4. Enter the new 4 digit password. Use the √/®/π/† buttons to select a number, and then press
the ENTER button. Repeat 4 times.
5.1 channel sound
is not being repro-
duced.
(DVD-E370,E365)
5. Re-enter the new password in the same manner to confirm. The Security menu re-appears.
Setting Up the General Options
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select
SETTINGS, then press the ENTER button.
2. Press the π/† buttons to select GENERAL, then press the ® or ENTER button.
3. Press the π/† buttons to select the desired item, then press the ® or ENTER button.
Setting Up the Support Options
Support option enable you to check your DVD player information such as the model code,
Software Version, The serial and version numbers can be found on the back side of your DVD-
Player.
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select
SETTINGS, then press the ENTER button.
2. Press the π/† buttons to select SUPPORT, then press the ® or ENTER button.
3. Select PRODUCT INFORMATION, then press the ® or ENTER button.
13
Spesifications
Memo
Power Requirements
Power Comsumption
AC110~240V, 50/60Hz
For the power supply and power con-
sumption, refer to the label attached
to the product
General
Weight
1.10 Kg
Dimensions
300mm(W) X 208mm(D) X 42mm(H)
+5ºC to +35ºC
Operating Temperature Range
Operating Humidity Range
Composite Video
10 % to 75 %
1 channel : 1.0 Vp-p (75 Ω load)
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Video Output
Audio Output
Component Video
Output terminal
Maximum Output Level
Frequency Response
5.1 Channel (DVD-E370, E365)
Digital Audio Out
2 CH
2Vrms
20 Hz to 20 kHz
F/L,F/R,R/L,R/R,CT,S/W
Coaxial terminal (S/PDIF)
14
Memo
15
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Area
` Asia Pacific
AUSTRALIA
NEW ZEALAND
CHINA
Contact Centre
Web Site
Area
Contact Centre
800-SAMSUNG (726-7864)
183-2255
Web Site
U.A.E
800-SAMSUNG (726-7864)
1300 362 603
OMAN
KUWAIT
0800 SAMSUNG (0800 726 786)
400-810-5858
(852) 3698 4698
BAHRAIN
Egypt
8000-4726
08000-726786
800-22273
HONG KONG
JORDAN
IRAN
1800 1100 11
021-8255
3030 8282
INDIA
Morocco
Saudi Arabia
` Africa
NIGERIA
080 100 2255
9200-21230
1800 3000 8282
1800 266 8282
0800-112-8888
021-5699-7777
INDONESIA
MALAYSIA
0800-726-7864
1800-88-9999
0800-10077
Ghana
0302-200077
1-800-10-SAMSUNG(726-7864) for PLDT
1-800-3-SAMSUNG(726-7864) for Digitel
1-800-8-SAMSUNG(726-7864) for Globe
02-5805777
Cote D’ Ivoire
8000 0077
PHILIPPINES
Senegal
800-00-0077
Cameroon
KENYA
7095- 0077
SINGAPORE
THAILAND
1800-SAMSUNG(726-7864)
0800 724 000
0800 300 300
0685 88 99 00
0860-SAMSUNG(726-7864 )
1800-29-3232
02-689-3232
UGANDA
TANZANIA
SOUTH AFRICA
0800-329-999
0266-026-066
TAIWAN
VIETNAM
1 800 588 889
` Middle East
AK68-02197A-00
|