Philips MP3 Docking Station DS7530 05 User Manual

Always there to help you  
Register your product and get support at  
DS7530/05  
Question?  
Contact  
Philips  
User manual  
 
Do not place any sources of danger on the  
apparatus (e.g. liquid filled objects, lighted  
candles).  
Where the plug of the Direct Plug-in  
Adapter is used as the disconnect device,  
the disconnect device shall remain readily  
operable.  
1 Important  
Follow all instructions.  
Do not block any ventilation openings.  
Install in accordance with the  
manufacturer's instructions.  
Do not install near any heat sources such  
as radiators, heat registers, stoves, or  
other apparatus (including amplifiers) that  
produce heat.  
Protect the power cord from being  
walked on or pinched, particularly at plugs,  
convenience receptacles, and the point  
where they exit from the apparatus.  
Only use attachments/accessories specified  
by the manufacturer.  
Warning  
Never remove the casing of this apparatus.  
Never place this apparatus on other electrical  
equipment.  
Keep this device away from direct sunlight, naked  
flames or heat.  
Ensure that you always have easy access to the power  
cord, plug or adaptor to disconnect the apparatus from  
the power.  
Unplug this apparatus during lightning  
storms or when unused for long periods  
of time.  
Refer all servicing to qualified service  
personnel. Servicing is required when  
the apparatus has been damaged in any  
way, such as power-supply cord or plug  
is damaged, liquid has been spilled or  
objects have fallen into the apparatus, the  
apparatus has been exposed to rain or  
moisture, does not operate normally, or  
has been dropped.  
Battery usage CAUTION To prevent  
battery leakage which may result in bodily  
injury, property damage, or damage to the unit:  
Install all batteries correctly, + and - as  
marked on the unit.  
Do not mix batteries (old and new or  
carbon and alkaline, etc.).  
Remove batteries when the unit is not  
used for a long time.  
Batteries (battery pack or batteries  
installed) shall not be exposed to  
excessive heat such as sunshine, fire or  
the like.  
Apparatus shall not be exposed to  
dripping or splashing.  
3
EN  
 
2 Your Docking  
Speaker  
Congratulations on your purchase, and  
welcome to Philips!To fully benefit from the  
support that Philips offers, register your product  
If you contact Philips, you will be asked for the  
model and serial number of this apparatus.The  
model number and serial number are on the  
back of the apparatus.Write the numbers here:  
Model No. __________________________  
Serial No. ___________________________  
Introduction  
With this docking speaker, you can enjoy audio  
from the iPod/iPhone, Bluetooth devices, and  
other external audio devices.  
What's in the box  
Check and identify the contents of your  
package:  
Main unit  
AC power adaptor  
Quick start guide  
EN  
4
 
Overview of the main unit  
a
d
c
b
e
f
h
g
a
Bluetooth  
Enable or disable Bluetooth function.  
b Dock for the iPod/iPhone  
c ON/OFF  
Switch on/off the docking speaker.  
d -VOLUME +  
Adjust volume.  
e DC IN  
Connect power.  
f AUX IN  
Connect an external audio device.  
g Battery compartment  
h Stand foot  
5
EN  
 
Option 2: Battery power  
3 Get started  
Caution  
Always follow the instructions in this chapter in  
sequence.  
Risk of explosion! Keep batteries away from heat,  
sunshine or fire. Never discard batteries in fire.  
Remove batteries if they are exhausted or will not be  
used for a long time.  
Batteries contain chemical substances, so they should  
be disposed of properly.  
Connect power  
This docking speaker can be powered by either  
AC power or batteries.  
1 Open the battery compartment.  
2
Insert 4 x 1.5V AA batteries with correct  
polarity (+/-) as indicated.  
Option 1:AC power  
3 Close the battery compartment.  
Caution  
PUSH  
Risk of product damage! Make sure that the power  
supply voltage matches the voltage printed on the back  
of the unit.  
Risk of electric shock! When you unplug the AC  
adapter, always pull the plug from the socket. Never  
pull the cord.  
Connect the AC power adapter to:  
the power socket at the back of the  
docking speaker.  
the wall socket.  
EN  
6
 
Turn on  
Switch the power button to ON position to  
turn on the docking speaker.  
» The LED indicator lights up.  
Switch to standby mode  
The docking speaker switches to economic  
standby mode in the following situation:  
The speaker is idle for 15 minutes when  
powered by AC supply;  
The iPod/iPhone or external audio device  
is disconnected when the speaker is  
operated on batteries.  
» The LED indicator lights off.  
7
EN  
 
3
For first-time use, you will be asked to  
install DockStudio app on your iPod/  
iPhone.  
4 Play  
4 Tap [Yes] (yes) to accept the installation  
request.  
5 Follow the on-screen instructions to  
Play from iPod/iPhone  
complete the installation.  
You can enjoy audio from your iPod/iPhone  
through this docking speaker.  
Compatible iPod/iPhone  
The docking speaker supports the following  
iPod and iPhone models:  
Made for.  
iPod touch (2nd, 3rd, and 4th generation)  
iPod classic  
iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th  
generation)  
iPhone 4S  
iPhone 4  
iPhone 3GS  
iPhone 3G  
6 Launch the app after the installation.  
7 Play audio on your iPod/iPhone.  
» You can hear audio from this docking  
speaker.  
Charge the iPod/iPhone  
When the docking speaker is connected to  
power, the docked iPod/iPhone begins to  
charge automatically.  
Listen to the iPod/iPhone  
Philips DockStudio app brings a suite of new  
features to your docking speaker, including  
Internet radio and a multi-function alarm clock.  
To enjoy more features, you are recommended  
to install this free application.  
Play from Bluetooth device  
Pair with Bluetooth devices  
Note  
1 Switch the power button to ON position.  
» The LED indicator lights up.  
2 Insert the iPod/iPhone into the dock.  
Before you connect a Bluetooth device to this docking  
speaker, familiarize yourself with the Bluetooth  
capabilities of the device.  
The effective operation range between the docking  
system and the paired device is approximately 10  
meters (30 feet).  
Keep this docking speaker away from other electronic  
devices that may cause interference.  
EN  
8
 
1 Press Bluetooth to select Bluetooth  
source.  
To disconnect Bluetooth:  
Press Bluetooth on the docking speaker  
again.  
» The Bluetooth button blinks.  
Deactivate Bluetooth function on  
your device or move it beyond the  
communication range.  
2 Turn on Bluetooth function on your device.  
Different devices may have different  
way to activate Bluetooth.  
Play from an external audio  
device  
With this docking speaker, you can also enjoy  
audio from an external device such as an MP3  
player.  
Note  
Make sure that no iPod/iPhone is docked in the docking  
speaker.  
1
Connect an MP3 link cable (not supplied) to:  
the AUX IN socket at the back of the  
docking speaker.  
the headphone socket on an external  
device.  
3 Scan Bluetooth devices that can pair with  
your device.  
2 Play music on the device (see the device's  
4 When “DS7530” is displayed on your  
device, select it to start connection.  
» Double beep tone confirmation is  
heard and the Bluetooth button stops  
blinking if connection is successful.  
user manual).  
Adjust volume  
» A different Bluetooth icon is displayed  
During play, press -VOLUME + to adjust  
on your device.  
volume.  
5 Play music in your device.  
» Music comes through the docking  
speaker.  
Tip  
If your Bluetooth device has been paired with DS7530  
before, you just need to find out “DS7530” on your  
Bluetooth menu, then confirm the connection.  
9
EN  
 
General information  
Power supply  
-AC Power  
5 Product  
information  
Model:  
S018KB0900200  
(Philips);  
Input: 100-240V ~  
50/60Hz, 500mA;  
Output:9V 2000 mA  
4 x AA batteries  
Note  
Product information is subject to change without prior  
notice.  
-Battery power  
Operation Power  
Consumption  
Eco Standby Power  
Consumption  
Max. load for iPod/  
iPhone  
<18 W  
Specifications  
<0.5 W  
5V 1 A  
Amplifier  
Dimensions  
Total Output Power  
Signal to Noise Ratio  
MP3 Link  
2 x 5 W RMS  
>60 dBA  
0.6V RMS 22  
kohm  
- Main Unit (W x H x D) 311 x 111 x 37.6mm  
Weight  
- Main Unit  
0.28 kg  
Bluetooth  
Standard  
Bluetooth Standard  
Version 2.1+EDR  
4 dBm (Class 2)  
2.402 ~ 2.480  
Output power  
Frequency band  
GHzISM Band  
Range  
10 m (free space)  
EN 10  
 
Cannot connect with the system.  
6 Troubleshooting  
The device does not support the profiles  
required for the system.  
The Bluetooth function of the device is not  
enabled. Refer to the user manual of the  
device for how to enable the function.  
The system is not in the pairing mode.  
The system is already connected with  
another Bluetooth-enabled device.  
Disconnect that device or all other  
connected devices and then try again.  
Warning  
Never remove the casing of this device.  
To keep the warranty valid, never try to repair  
the system yourself.  
If you encounter problems when using this  
device, check the following points before  
requesting service. If the problem remains  
unsolved, go to the Philips Web page  
(www.philips.com/support).When you contact  
Philips, make sure that the device is nearby  
and the model number and serial number are  
available.  
The paired device connects and disconnects  
constantly.  
The Bluetooth reception is poor. Move  
the device closer to the system or remove  
any obstacle between the device and the  
system.  
For some devices, the Bluetooth  
connection may be deactivated  
automatically as a power-saving feature.  
This does not indicate any malfunction of  
the system.  
No power  
Ensure that the AC power plug of the unit  
is connected properly.  
Ensure that there is power at the AC  
outlet.  
No sound  
Adjust the volume.  
No response from the unit  
Disconnect and reconnect the AC power  
plug, then turn on the unit again.  
About Bluetooth device  
Music playback is unavailable on the system  
even after successful Bluetooth connection.  
The device cannot be used with the  
system to play music.  
The audio quality is poor after connection  
with a Bluetooth-enabled device.  
The Bluetooth reception is poor. Move  
the device closer to the system or remove  
any obstacle between the device and the  
system.  
11 EN  
 
Please inform yourself about the local separate  
collection system for electrical and electronic  
products.  
7 Notice  
Please act according to your local rules and  
do not dispose of your old products with your  
normal household waste. Correct disposal of  
your old product helps to prevent potential  
negative consequences for the environment and  
human health.  
Any changes or modifications made to this  
device that are not expressly approved by  
Philips Consumer Lifestyle may void the user’s  
authority to operate the equipment.  
“Made for iPod” and “Made for iPhone”  
mean that an electronic accessory has been  
designed to connect specifically to iPod or  
iPhone respectively, and has been certified by  
the developer to meet Apple performance  
standards.Apple is not responsible for the  
operation of this device or its compliance with  
safety and regulatory standards. Please note that  
the use of this accessory with iPod or iPhone  
may affect wireless performance.  
Your product contains batteries covered by  
the European Directive 2006/66/EC, which  
cannot be disposed with normal household  
waste.Please inform yourself about the local  
rules on separate collection of batteries  
because correct disposal helps to prevent  
negative consequences for the environmental  
and human health.  
Environmental information  
All unnecessary packaging has been omitted.  
We have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene  
(bags, protective foam sheet.)  
iPod and iPhone are trademarks of Apple Inc.,  
registered in the U.S. and other countries.  
Your system consists of materials which can  
be recycled and reused if disassembled by  
a specialized company. Please observe the  
local regulations regarding the disposal of  
packaging materials, exhausted batteries and old  
equipment.  
This product complies with the radio  
interference requirements of the European  
Community.  
Note  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
The type plate is located inside the stand foot of the  
docking speaker.  
When this crossed-out wheeled bin symbol is  
attached to a product it means that the product is  
covered by the European Directive 2002/96/EC.  
EN 12  
 
Specifications are subject to change without notice  
© 2012 Koninklijke Philips Electronics N.V.  
All rights reserved.  
DS7530_05_UM_V2.1  
 

Peavey Musical Instrument Amplifier Alpha User Manual
Philips Baby Monitor SC479 DECT User Manual
Philips CD Player CDR 560 User Manual
Philips Hot Beverage Maker HD4650 User Manual
Philips Indoor Furnishings 22FDF1013 User Manual
Philips Telephone SE 745 User Manual
Planet Technology Security Camera CAM DM33 User Manual
Polycom Conference Phone 3726 17900 001 User Manual
Porter Cable Router 891 User Manual
Precisionaire Air Cleaner Cell GT User Manual