Planar Car Video System PL1911M User Manual

 
Preface  
This manual is designed to assist users in setting up and using the LCD Monitor. Information in this document has been carefully  
checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is  
subject to change without notice. This document contains proprietary information protected by copyright. All rights are  
reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior  
written permission of the manufacturer. Windows is a registered trademark of Microsoft Inc. Other brand or product names  
are trademarks of their respective holders.  
FCC Statement Warning  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the  
instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
Reposition or relocate the receiving antenna.  
Increase the separation between the equipment and the receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced monitor technician for help.  
Warning  
Use only shielded signal cables to connect I/O devices to this equipment. You are cautioned that changes or  
modifications not expressly approved by the party responsible for compliance could void your authority to  
operate the equipment.  
This device complies with part 15FCC Rules. Operation is subject to the following two conditions(1) This device  
may not cause harmful interference. (2) This device must accept any interference received, including  
interference that may cause undesired operation.  
Canadian DOC Notice  
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing  
Equipment Regulations.  
Cet appareil numérique de la classe B repecte toutes les exigences du Règlement sur le matériel  
brouilleur du Canada.  
2
 
Important Safety Instructions  
Please read the following instructions carefully. This manual should be retained for future use.  
1. To clean the LCD Monitor screen:  
-- Power off the LCD Monitor and unplug the AC Cord.  
-- Spray a non-solvent cleaning solution onto a rag.  
-- Gently clean the screen with dampened rag.  
2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or sunlight can  
severely damage it.  
3. Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.  
4. Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should be  
performed by an authorized technician.  
5. Store the LCD Monitor in a room with a room temperature of -20° ~ 60°C (or -4° ~ 140°F). Storing the LCD  
Monitor outside this range could result in permanent damage.  
6. If any of the following occurs, immediately unplug your monitor and call an authorized technician.  
*
*
*
Monitor to PC signal cable is frayed or damaged.  
Liquid spilled into LCD Monitor or the monitor has been exposed to rain.  
LCD Monitor or the case is damaged.  
7. Only use the supplied main lead to connect the monitor. For a nominal current up to 6A and a device weight  
above 3 kg, a line not lighter than H05VV-F, 3G, 0.75 mm2 must be used.  
Important Recycle Instruction:  
Lamp(s) inside this product contain mercury. This product may contain other  
electronic waste that can be hazardous if not disposed of properly. Recycle or dispose in  
accordance with local, state, or federal Laws. For more information, contact the  
Electronic Industries Alliance at WWW.EIAE.ORG. For lamp specific disposal information  
check WWW.LAMPRECYCLE.ORG.  
Contains Mercury, Dispose of Properly  
3
 
Installation  
Unpacking  
Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a  
stable and clean surface near a wall power outlet. Make sure that LCD Monitor has enough space around it for  
sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that the  
Monitor does not become too hot.  
After you unpack the LCD Monitor, make sure that the following items were included in the box:  
*
*
*
LCD Monitor  
*
*
*
User's Manual  
*
Base  
Monitor-to-PC VGA Cable  
Monitor-to-PC DVI-D Cable  
Stereo Jack Audio Cable  
Power Cord  
4
 
Connecting the LCD Monitor and Base  
When you open the box, place the monitor and put on the  
desk first. (See fig. 1-1)  
4
hook up the cable clip  
Connect the LCD monitor and base.  
Using your hand, lock the base and neck by screwing the  
thread clockwise.  
To unlock the height adjustment feature of the stand,  
locate the pin on the back of the stand column and turn  
the pin knob counterclockwise.  
Mount the cable clip for cable management.  
2
3
Remove PIN by turning  
counterclockwise  
Figure 1-1  
Tilt, Swivel and Pivot Rotation  
The LCD Monitor is designed to have a tilt range  
of -5°to +20°, a swivel range of -35°to +35°, and a  
90° pivot rotation. (See fig. 1-2)  
°
Figure 1-2  
Warning  
Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this will result in  
damaging the Monitor and Monitor stand. The monitor stand base may forcefully extend and cause injury. Raise  
the monitor to its "Full Up" position before removing the monitor stand.  
5
 
Connecting the Display  
1. Power off your computer.  
2. Connect one end of the signal cable to the LCD Monitor’s VGA  
port or DVI port. (See Fig 1-3)  
3. Connect the other end of the signal cable to the VGA port or DVI  
port on your PC.  
4. Make sure connections are secure.  
Figure 1-3  
Connecting the AC Power  
1. Connect the power cord to the LCD Monitor. (See Fig. 1-4)  
Connect the power cord to an AC power source.  
Figure 1-4  
Connecting the Audio Cable  
1. Connect the audio cable to the “LINE OUT” jack on your PC's  
audio card or to the front panel's “AUDIO OUT” jack of your CD  
ROM drive. (See Fig. 1-5)  
2. Connect the other end of the audio cable to the LCD Monitor's  
" LINE IN " jack.  
Audio Jack  
Figure 1-5  
Setting Up the LCD Monitor  
1. Make sure the AC power cord is connected to the LCD Monitor.  
2. Turn on the LCD Monitor's power switch, located on the bezel of the monitor.  
Power Management System  
This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The VESA DPMS provides  
four power saving modes through detecting a horizontal or vertical sync. signal.  
When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED indicator will light  
yellow.  
6
 
Optional Mounting Alternatives  
Warning: The monitor stand base may forcefully extend and cause injury. Raise the monitor to its "Full Up"  
position before removing the monitor stand.  
Detaching LCD Monitor from Its Stand  
Unscrew screws the swivel base support column and pull  
downthe hinge to release.  
Cable management ring.  
Figure 1-6  
Interface for Arm Applications  
Before installing to mounting device, please refer to Fig.1-3.  
The rear of this LCD display has four integrated 4 mm, 0.7 pitches  
threaded nuts, as well as four 5 mm access holes in the plastic  
covering as illustrated in Figure 1-7. These specifications meet the  
VESA Flat Panel Monitor Physical Mounting Interface Standard  
(paragraphs 2.1 and 2.1.3, version 1, dated 13 November 1997).  
Note :Please use M 4mm x 100m (L) screws for this  
application.  
Figure 1-7  
7
 
Display Controls  
User Controls  
A brief description and the location of all LCD Monitor functions controls and indicators:  
Figure 2-1  
Power LED will be Green when the monitor is on, Yellow when in power  
saving mode, and Dark when the monitor is off.  
Press this button to turn on and turn off the monitor.  
1
Function select (clockwise)  
2
3
4
5
Function select (counter-clockwise) / Input source select (When OSD control  
and Volume OSD are not activated)  
Audio Volume increase / Adjust increase  
Auto adjust (When OSD/Volume control is not activated) / Audio Volume  
decrease / Adjust decrease  
External Headphone Jack. The monitor speakers will be disabled when using  
an external headphone or external speakers.  
6
Adjusting the Monitor's Display  
The monitor has four function control buttons to select among functions shown on OSD menu, designed for  
easy user-viewing environments.  
OSD Function Menu  
To access OSD Main menu, simply press  
. Function Select  
control buttons, and the menu diagram will pop up on the  
screen as shown on Fig. 2-2:  
Continue pressing the Function Select buttons to scroll through  
the entire menu items, then press Adjustment Control buttons  
to adjust content of selected item.  
Figure 2-2  
Attention  
Firmware revision may have been updated into a latest version while the version number shown  
on all OSD menus in this manual will stay as Ver. 1.00  
8
 
Function Description  
Icon  
Function  
Brightness  
Contrast  
Function Description  
101 scales of brightness are available to choose from (0 to 100).  
101 scales of contrast are available to choose from (0 to 100).  
This function let's you adjust the display's horizontal position. (Only support  
analog input)  
H. Position  
V. Position  
This function let's you adjust the display's vertical position. (Only support analog  
input)  
This function let's you set the transparency of the OSD menu. The transparency is  
adjustable from 0 to 10. 11 scales are available.  
OSD Transparency  
Phase  
A total of 101 scales (0 to 100) are available to adjust the focus and clarity of the display.  
(Only support analog input)  
This function carries a frequency-tracking feature that offers users better stability  
and clarity. 101 scales (from -50 to +50) are available on the mode that is  
currently running. The adjustable range can be variable in different modes. This  
function records the deviated number of clock period between input timing and  
supported timing. The clock value may not be ”0” after Auto Adjustment when  
the input timing is different from supported timing. (Only support analog input)  
Clock  
Push the  
or  
button to select a different color temperature. Please see  
Color Temperature  
the diagram below for function and description.  
OSD H. Position  
OSD V. Position  
This function moves the OSD menu window horizontally.  
This function moves the OSD menu window vertically.  
Because the H and V-Frequencies of both 640 x 400 70Hz, and 720 x 400 70Hz, are  
the same, this function let's you manually select either 640 x 400 (graphics  
mode), or 720 x 400 (text mode).  
Graph / Text  
Recall  
The recall function will return all adjusted parameters to factory preset values.  
Nine OSD language options are available:  
English, German, French, Spanish, Italian, Japan, Russian, Simplified Chinese and  
Traditional Chinese.  
Language  
Press the  
or  
adjustment control button to select other language.  
The Auto Adjustment function let you adjust the display size, clock and phase to  
obtain the best viewing settings. This process will take 3 ~ 5 seconds to  
complete. Attention: After Auto Adjustment, the display might display wrong  
position or size, if it has received a pattern which has no screen border.  
Auto and Input Select  
Exit  
Saves the values of this setting and exits the OSD menu function.  
Icon  
Function  
Description  
CIE coordinated Color Temperature of 9300°K  
CIE coordinated Color Temperature of 7500°K  
CIE coordinated Color Temperature of 6500°K  
Sets the CIE coordinate color temperature to 9300°K  
Sets the CIE coordinate color temperature to 7500°K  
Sets the CIE coordinate color temperature to 6500°K  
9300  
7500  
6500  
Three colors (Red, Green, Blue) can be  
adjusted from the OSD menu  
Sets the settings to a user defined CIE Temperature.  
User  
9
 
OSD Lock Out Function  
When the monitor is in normal display, you can enable the “OSD Lock Out” function.  
Option 1: OSD lock – all 4 buttons are locked except the POWERbutton.  
,
and  
Press and hold the  
buttons at the same time for 3 seconds to lock the buttons.  
The monitor will show an OSD Lock Outmessage for 5~10 seconds and the message will  
disappear automatically.  
Repeat this step to unlock.  
Option 2: OSD & Power button lock – all 5 buttons including the POWERbutton are locked.  
Press and hold the  
and  
buttons for same time 3 seconds to lock all 5 buttons.  
The monitor will show an Lock Outmessage for 5~10 seconds and the message will disappear  
automatically.  
Repeat this step to unlock.  
10  
 
Technical Information  
Specifications  
LCD Panel  
Size  
19"  
Display Type  
Resolution  
Active matrix color TFT LCD  
1280 x 1024  
Display Dot  
1280 x (RGB) x 1024  
376.32 x 301.056 (H x V)  
16.7M (RGB 6 bit+FRC)  
660 Vrms  
Display Area (mm)  
Display Color  
Lamp Voltage (typical)  
Lamp Current (typical)  
7.5 mA rms.  
Video  
Input Signal  
Input Impedance  
Polarity  
Analogue RGB 0.7Vp-p  
75 Ohm 2%  
Positive, Negative  
Amplitude  
0 - 0.7 0.05 Vp  
Multi-mode Supported  
Horizontal Frequency: 30 ~ 80 kHz  
Vertical Frequency: 56 ~ 75 Hz  
Control  
Power switch  
On/Off switch with LED indicator  
Audio  
Input  
Output  
500mVrms  
1W+1W  
OSD  
Brightness  
Contrast  
Digital  
Digital  
Horizontal Position  
Vertical Position  
Phase  
Digital  
Digital  
Digital  
Clock  
Digital  
Display Mode Setup  
OSD Format  
Use EEPROM to save settings in memory  
26 characters x 15 rows  
11  
 
Power Management  
Mode  
DPM ON  
Power Consumption*  
28W maximum  
2W maximum  
AC Input  
240 VAC  
240 VAC  
240 VAC  
240 VAC  
LED Color  
Green  
DPM OFF  
Yellow  
Dark  
DC switch off  
Disconnected  
1W maximum  
2W maximum  
Yellow  
Meeting VESA DPM requirements measured from AC Input end of AC power cord.  
Analogue  
Sync Input  
Signal  
Separate TTL compatible horizontal and vertical  
synchronization  
Polarity  
Positive and negative  
Supports VESA DDC2B functions  
Plug & Play  
External Connection  
Power Input (AC input)  
Video Cable  
Audio Cable  
AC socket  
15-pin D-sub connector  
Stereo Jack  
Environment  
Temperature  
Relative  
5°C to 40°C/41°F to 104°F  
20% to 80%  
Operating Condition:  
Humidity  
Temperature  
-20°C to 60° C/-4°F to140° F  
5% to 85%  
Storage Condition:  
Relative  
Humidity  
Power Supply (AC Input)  
Input Voltage  
Input Current  
Single phase, 100 ~ 240VAC, 50 / 60 Hz  
1.2 A maximum  
Size and Weight  
Dimensions  
Net Weight  
412.6 (W) x 436.6 (H) x 219.17(D) mm  
7.7 0.3 kg  
Gross Weight  
10.1 0.3 kg  
12  
 
Standard Timing Table  
If the selected timing is NOT included in the table below, this LCD monitor will use the most suitable available timing.  
FH(kHZ)  
FV(HZ)  
SYNC  
FRONT  
SYNC  
TOTAL  
ACTIVE  
BACK  
PORCH  
PIXEL  
TIMING  
WIDTH  
(DOT/LINE)  
PORCH  
(DOT/LINE) (DOT/LINE)  
POLARITY  
(DOT/  
LINE)  
(DOT/  
LINE)  
FOREQ  
(MHZ)  
640x350  
VGA-350  
640x400  
NEC PC9801  
640x400  
VGA-GRAPH  
640x400  
NEC PC9821  
640X480  
VESA-PAL  
640x480  
VGA-480  
31.469  
70.087  
24.83  
+
+
-
800  
449  
848  
440  
800  
449  
800  
449  
800  
629  
800  
525  
864  
525  
832  
520  
640  
350  
640  
400  
640  
400  
640  
400  
640  
480  
640  
480  
640  
480  
640  
480  
96  
2
64  
8
96  
2
64  
2
96  
2
96  
2
64  
3
40  
3
16  
37  
64  
7
48  
60  
80  
25  
48  
35  
80  
34  
48  
85  
48  
33  
96  
39  
120  
20  
25.175  
21.05  
56.42  
31.469  
70.087  
31.5  
16  
12  
16  
13  
16  
62  
16  
10  
64  
3
25.175  
25.197  
25.175  
25.175  
30.24  
70.15  
31.469  
50.030  
31.469  
59.94  
35.00  
66.67  
-
640x480  
APPLE MAC-480  
640x480  
37.861  
72.809  
16  
1
31.5  
VESA-480-72Hz  
640x480  
VESA-480-75Hz  
720x400  
VGA-400-TEXT  
832x624 APPLE  
37.5  
75  
31.469  
70.087  
49.725  
+
840  
500  
640  
480  
720  
400  
832  
64  
3
108  
2
64  
16  
1
18  
12  
32  
120  
16  
31.5  
900  
54  
28.322  
57.2832  
449  
1152  
35  
224  
MAC-800  
800x600  
74.55  
35.156  
56.25  
37.879  
60.317  
48.077  
72.188  
46.875  
75  
+
+
+
+
+
+
+
+
667  
1024  
625  
1056  
628  
1040  
666  
1056  
625  
1344  
806  
1328  
816  
1328  
806  
1312  
800  
1328  
803  
1480  
912  
1480  
912  
1600  
900  
1800  
1000  
1800  
1000  
1800  
1000  
1688  
1066  
1688  
1066  
624  
800  
3
72  
2
128  
4
120  
6
80  
3
136  
6
176  
4
136  
6
96  
3
96  
3
96  
3
96  
3
128  
2
112  
3
112  
3
112  
3
112  
3
1
24  
1
40  
1
56  
37  
16  
1
24  
3
16  
8
24  
3
16  
1
32  
3
40  
13  
32  
1
64  
2
96  
1
96  
1
96  
1
48  
1
16  
1
39  
128  
22  
36  
40  
SVGA  
600  
800x600  
VESA-600-60Hz  
800x600  
VESA-600-72Hz  
800x600  
VESA-600-75Hz  
1024x768  
XGA  
1024x768  
COMPAQ-XGA  
1024x768  
VESA-768-70Hz  
1024x768  
VESA-768-75Hz  
1024x768  
APPLE MAC-768  
1152x864  
(60Hz)  
1152x864  
(70Hz)  
1152x864  
(75Hz)  
1280x960  
(60Hz)  
1280x960  
(70Hz)  
1280x960  
(75Hz)  
1280x1024VESA-1  
024-60Hz  
1280x1024VESA-1  
024-75Hz  
800  
88  
600  
23  
800  
64  
50  
600  
23  
800  
160  
21  
49.5  
65  
600  
48.363  
60.004  
53.964  
66.132  
56.476  
70.069  
60.023  
75.029  
60.24  
75.02  
54.054  
59.270  
63.851  
70.012  
67.50  
75.00  
60.00  
60.00  
70.00  
70.00  
75.00  
75.00  
64  
1024  
768  
160  
29  
112  
36  
144  
29  
176  
28  
176  
29  
192  
32  
200  
44  
256  
32  
312  
36  
312  
36  
312  
36  
248  
38  
+
+
1024  
768  
1024  
768  
1024  
768  
1024  
768  
1152  
864  
1152  
864  
1152  
864  
1280  
960  
1280  
960  
1280  
960  
1280  
1024  
1280  
1024  
71.664  
75  
+
+
78.75  
80  
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
80  
94.499  
108.00  
108.00  
126.00  
135.00  
108  
60  
80  
144  
3
248  
38  
135  
75  
Note: Mode 640x350, 640x400 and 720x400 is centered in the middle of the display and can not be expanded  
to full screen.  
13  
 
Troubleshooting  
This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing differences among  
various VGA cards in the market, users may initially experience an unstable or unclear display whenever a new display  
mode or new VGA card is selected.  
Attention  
This LCD Monitor Supports Multiple VGA Modes.  
Refer to the Standard Timing Table for a listing of modes supported by this LCD Monitor.  
PROBLEM Picture is unclear and unstable  
The picture is unclear and unstable, please perform the following steps:  
1. Enter PC to “Shut Down Windows” status while you’re in MS-Windows environment.  
2. Check the screen to see if there’s any black vertical stripes appear. If there are, take advantage of the “Clock”  
function in OSD menu and adjust (by increment or decrement numbers) until those bars disappear.  
3. Move to “Phase” function in OSD menu again and adjust the monitor screen to its most clear display.  
4. Click “No” on “Shut Down Windows” and back to the normal PC operating environment.  
PROBLEM There is no picture on LCD Monitor  
If there’s no picture on the LCD Monitor, please perform the following steps:  
1. Make sure the power indicator on the LCD Monitor is ON, all connections are secured, and the system is running on  
the correct timing. Refer to Chapter 3 for information on timing.  
2. Turn off the LCD Monitor and then turn it back on again. If there is still no picture, press the Adjustment Control  
button several times.  
3. If step 2 doesn’t work, connect your PC system to another external CRT. If your PC system Functions properly with a  
CRT Monitor but it does not function with the LCD Monitor, the output timing of the VGA card may be out of the  
LCD’s synchronous range. Please change to an alternative mode listed in the Standard Timing Table or replace the  
VGA card, and then repeat steps 1 and 2.  
PROBLEM There is no picture on LCD Monitor  
If you have chosen an output timing that is outside of the LCD Monitor’s synchronous range (Horizontal: 30 ~ 80 kHz  
and Vertical: 56 ~ 75 Hz), the OSD will display a “Out of Range” message. Choose a mode that is supported by your LCD  
Monitor.  
Also, if the signal cable is not connected to LCD monitor at all or properly, the monitor screen will display a message  
“No Input Signal”.  
14  
 
Product Registration and Technical Support  
Register Your Planar Products Today  
Thank you choosing Planar. To assure you receive all the benefits of your Planar product  
and services, register your Planar product today.  
Visit our website to register your product at  
Cables, Replacement Lamps, Accessories  
To find cables, replacement lamps and accessories for your Planar projector, LCD monitor,  
Technical Support  
touch screen drivers, warranty information and access to Planar's Technical Library for online  
troubleshooting.  
To speak with Planar Customer Support please have you model and serial number available  
and dial:  
Planar Support  
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the US.  
Hours: 24 hours a day, 7 days a week.  
Toll or long distance charges may apply.  
15  
 
 

Peavey Speaker A A Series User Manual
Pelco Camera Lens TVJ6AC 1 LPP User Manual
Pelco Security Camera C1937M C 4 03 User Manual
Philips Baby Accessories SCF174 User Manual
Philips Iron GC1115 User Manual
Philips MP3 Player SA60XX User Manual
Pioneer Car Video System AVX 7650 User Manual
Planar Computer Monitor PQ191M User Manual
Polaroid Digital Camera i531 User Manual
Presonus Audio electronic Microphone TubePre User Manual