Planar Computer Monitor PX191 User Manual

PX191  
LCD Monitor  
USER’S GUIDE  
 
Table of Contents  
Usage Notice  
Precautions ................................................................................. 2  
Introduction  
About the Product ....................................................................... 3  
Package Overview...................................................................... 4  
Installation  
Product Overview ........................................................................ 5  
Connecting the Display ............................................................... 7  
User Controls  
Front Panel Controls ................................................................... 10  
How to Use the OSD Menus........................................................ 11  
On-Screen Display Menus .......................................................... 12  
Appendices  
Troubleshooting .......................................................................... 16  
Warning Signal ........................................................................... 17  
Product Dimensions .................................................................... 18  
Compatibility Modes ................................................................... 19  
Pivot Software Installation..............................................................20  
English  
1
 
Usage Notice  
Warning- To prevent the risk of fire or shock hazards, do not  
expose this product to rain or moisture.  
Warning- Please do not open or disassemble the product as this  
may cause electric shock.  
Precautions  
Follow all warnings, precautions and maintenance as recommended  
in this user’s manual to maximize the life of your unit.  
Do:  
q Turn off the product before cleaning.  
q Use only a dry soft cloth or clean room wiper when cleaning the  
LCD panel surface.  
q Use a soft cloth moistened with mild detergent to clean the  
display housing.  
q Use only high quality and safety approved AC/DC power  
adapter.  
q Disconnect the power plug from AC outlet if the product is not  
used for a long period of time.  
Don’t:  
q Do not touch the LCD panel surface with sharp or hard objects.  
q Do not use abrasive cleaners, waxes or solvents for your  
cleaning.  
q Do not operate the product under the following conditions:  
- Extremely hot, cold or humid environment.  
- Areas susceptible to excessive dust and dirt.  
- Near any appliance generating a strong magnetic field.  
- Place in direct sunlight.  
English  
2
 
Introduction  
About the Product  
Having a 19” flat panel screen with an active matrix, thin-film transistor  
(TFT) liquid crystal display (LCD) , this product also demonstrates  
following outstanding features:  
q Analog and Digital signal input  
q Active matrix TFT LCD technology  
q 1280 x 1024 addressable pixels  
q 19” diagonal screen size  
q 31.5 ~ 80 kHz horizontal scan  
q 56 ~ 75 Hz refresh rate  
q VESA wall mountable  
q Auto-adjustment  
q Multilingual OSD user controls  
q Adjustment stand design brings users the conveniences for easy  
storage and VESA Mounting applications  
q VESADPMS power saving  
q Kensington lock capability  
English  
3
 
Package Overview  
LCD Display  
Power Adapter  
Power Cord  
DVI-D Cable  
VGA Signal Cable  
User’s Manual  
Quick Start Guide  
Planar Product  
Family CD  
CD-ROM for  
Pivot software  
English  
 
4
Installation  
Product Overview  
u
Front View  
LCDDisplay  
Panel  
Controls  
Stand  
u
Rear View  
Kensington Lock  
Connector Ports  
DC  
Digital Port  
VGA Input  
Power-In  
English  
5
 
VESA Mount on your monitor  
This monitor conforms to the VESA Flat Panel Mounting Physical  
Mounting Interface Standard which defines a physical mounting interface  
for flat panel monitors, and corresponding standards for flat panel  
monitor mounting devices, such as wall and table arms.The VESA  
mounting interface is located on the back of your monitor.  
To mount the monitor on a swing arm or other mounting fixture,  
follow the instruction included with the mounting fixture to be used.  
Slots  
100mm  
VESA  
Mounting  
Interface  
100mm  
Warning!  
Please must select the proper screws!  
The depth from plastic back cover to the bottom of the screw hole is 8mm.  
The spec is M4 screw.  
English  
6
 
Conne c ting the Displa y (Figure 8.1)  
To setup this display, please refer to the following figure and procedures.  
1. Be sure all equipments are off.  
2. Connect the DC power cord to the power connector; plug one end of the  
AC power cord into the power adapter, and then the other end into an  
electrical outlet(u).  
3. Connect the VGA signal cable from display VGA input connector to the  
15-pin connector of your host computer and tighten the screws(v).  
4. For the PC with DVI digital output: Connect the DVI signal cable to the  
connector of the display card in your computer; connect the other side to  
the DVI-D input port of your display. Tighten the screws(w).  
5. Turn on your computer and display.  
Note: To ensure the LCD display can work well with your computer, please  
configure the display mode of your graphic card to make it less than or equal  
to 1280 x 1024 resolution and make sure timing of the display mode is  
compatible with the LCD display. We have listed the “Compatibility Modes”  
of this LCD display in appendices for your reference.  
English  
7
 
Figure 8.1  

VGA  
Cable  
Œ
Power Adapter  
& Power Cord  
Ž
DVI-D Cable  
English  
8
 
 
User Controls  
Front Panel Controls  
Œ

Ž


No./ Icon  
Control  
Function  
Œ MENU  
Menu button  
Select/Auto  
To pop up the OSD menus.  
 SELECT/AUTO  
Select- To select the adjust-  
ment items from OSD menus.  
Auto-To activate the “Auto  
Adjustment” function to obtain  
an optimum image.  
Ž
Brightness Minus/Minus 1.Decreases the brightness of  
the display image.  
3
2.Decreases value of the  
adjustment items.  

Brightness Plus/Plus  
Power LED  
1.Increases the brightness of  
the display image.  
2.Increases value of the  
adjustment items.  
4

1.Green indicates the display  
is turned on.  
2. Amber indicates the display  
in power-saving mode.  
Power Switch  
Switches on/off the power of  
the LCD display.  
English  
10  
 
How to Use the OSD Menus  
1. Press the “M” button to pop up the on-screen menu and to select  
between the four Main Menus.  
2. Choose the adjustment items by pressing the “S” button.  
3. Adjust the value of the adjustment items by pressing the “ ” or “ ”  
-
+
button.  
4. Once you don’t operate the OSD menus after a pre-set time, the OSD  
menus will automatically disappear.  
English  
11  
 
On-ScreenDisplay Menus  
First OSD Menu:  
4 Auto-Adjustment  
Chooses this function to obtain an optimum image.  
4 Contrast  
Adjusts the contrast of the display image.  
4 Brightness  
Adjusts the brightness of the display image.  
4 Horizontal Position  
Changes the horizontal position of the image.  
4 Vertical Position  
Changes the vertical position of the image.  
4 Clock  
Changes the display data frequency to match the frequency of your  
graphic card. When you are experiencing vertical flickering bar, use  
this function to make an adjustment.  
4 Phase  
Synchronizes the signal timing of the display to that of the graphic card.  
When you are experiencing unstable to flickering image, use this function to  
make an adjustment.  
English  
12  
 
Second OSD Menu:  
4 Display Mode  
Selects this function to demonstrate the display resolution, vertical refresh,  
and horizontal scan of the current mode.  
4 OSD Off-Time  
Adjusts the time period for OSD menu disappear.  
4 Language  
Chooses the language you need.  
4 Sharpness  
Adjust the sharpness of the image.  
4 Reset  
Returns the display parameters of the current mode to its factory default  
settings.  
English  
13  
 
Third OSD Menu:  
4 Input Select  
It allows you to select the type of signal.  
English  
14  
 
Fourth OSD Menu:  
4 Color Setting  
Adjusts the color temperature.  
4 Color Adjustment-Red  
It allows you to adjust the red color of the display.  
4 Color Adjustment-Green  
It allows you to adjust the green color of the display.  
4 Color Adjustment-Blue  
It allows you to adjust the blue color of the display.  
English  
15  
 
Appendices  
Troubleshooting  
If you are experiencing trouble with the LCD display, refer to the  
follows. If the problem persists, please contact your local dealer or  
our service center.  
Problem: No image appears on screen.  
Check that all the I/O and power connectors are correctly and  
well connected as described in the “ Installation ” section.  
4
Make sure the pins of the connectors are not crooked or broken.  
4
Problem: Partial image or incorrectly displayed the image.  
Check to see if the resolution of your computer is higher than that  
of the LCD display.  
4
Reconfigure the resolution of your computer to make it less than  
4
or equal to 1280 x 1024.  
Problem: Image has vertical flickering line bars.  
Use “ Frequency ” to make an adjustment.  
4
Check and reconfigure the display mode of the vertical refresh  
rate of your graphic card to make it compatible with the LCD  
display.  
4
Problem: Image is unstable and flickering  
Use “ Tracking ” to make an adjustment.  
4
Problem: Image is scrolling  
Check and make sure the VGA signal cable (or adapter) is well  
connected.  
4
Check and reconfigure the display mode of the vertical refresh  
rate of your graphic card to make it compatible with the LCD  
display.  
4
Problem: Vague image (characters and graphics)  
Use “ Frequency ” to make an adjustment. If this problem still exists,  
use “Tracking” to make an adjustment.  
4
English  
16  
 
Warning Signal  
Sometimes you probably will see the warning messages from this  
LCD screen. This means that the LCD display cannot exactly receive the  
signal from the computer graphic card.  
There are three kind of situations may happen.Please check with the  
connected cables or contact your local dealer for more information.  
4No Signal  
This message means that the LCD display has been powered on but it  
cannot receive any signal from the computer graphic card. Check all the  
power switches, power cables, and VGA signal cable.  
4Going to Sleep  
This message means that the LCD display is under the power saving  
mode. In addition, the LCD display will go to this sleeping mode when  
experiencing a sudden signal disconnecting problem.  
4Unsupport Mode  
This message means that the signal of the computer graphic card is not  
compatible with the LCD display. When the signal is not included in the  
compatibility mode we have listed in the Appendices of this manual, the  
LCD display will appear this message.  
English  
17  
 
Product Dimensions  
417.78mm/16.45”  
508.74mm/20.03”  
Front View  
59mm/2.32”  
Side View  
215.40mm/8.48”  
Top View  
English  
18  
 
Compatibility Modes  
Mode  
Resolution  
640 x 350  
640 x 400  
640 x 480  
720 x 400  
640 x 480  
640 x 480  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
1024 x 768  
1024 x 768  
1024 x 768  
1280 x 1024  
1280 x 1024  
640 x 480  
640 x 480  
832 x 624  
1024 x 768  
1152 x 900  
1152 x 900  
Frequency (Hz)  
H. Frequency (kHz)  
31.5  
IBM VGA  
70  
70  
60  
70  
72  
75  
56  
60  
72  
75  
60  
70  
75  
60  
75  
67  
67  
75  
75  
66  
76  
IBM VGA  
31.5  
IBM VGA  
31.5  
IBM VGA  
31.5  
VESA VGA  
VESA VGA  
VESA SVGA  
VESA SVGA  
VESA SVGA  
VESA SVGA  
VESA XGA  
VESA XGA  
VESA XGA  
VESA SXGA  
VESA SXGA  
Apple Mac LC  
Apple Mac II  
Apple Mac  
Apple Mac  
Sun Micro  
37.9  
37.5  
35.2  
37.9  
48.1  
46.9  
48.4  
56.5  
60.0  
64.0  
80  
34.9  
35.0  
49.7  
60.2  
61.8  
Sun Micro  
71.1  
English  
19  
 
Pivot Software Installation  
Follows are the procedures for pivot software set up.  
1. Insert the Pivot Pro CD-ROM into the CD-ROM driver.  
2. Run the Start_Pivot program and select the pivot option to install  
portrait displays’ software on your computer.  
3. Restart your computer. To Change orientation, right click anywhere on  
the desktop and select Rotate 0, 90, 180, or 270 from the menu. Now  
hold the edges of your display and rotate it.  
4. Start exploring the benefits of your new portrait monitor. Web pages,  
E-mail, reports and letters are best viewed in portrait orientation. They  
can be viewed and edited without the need to scroll the page.  
English  
20  
 

Philips Bottle Warmer SCF600 12 User Manual
Philips CRT Television 15PT2526 User Manual
Philips DVR VR558 User Manual
Philips Stereo System C255 User Manual
Pioneer Car Speaker FH P8000BT User Manual
Pioneer Car Stereo System DEH P4550 User Manual
Planar Computer Monitor PL1711M User Manual
Polycom IP Phone 1725 12490 001 User Manual
ProForm Computer Monitor 240P2 User Manual
ProForm Home Gym PFEL39014 User Manual