The information contained in this document is subject to change without notice.
This document contains proprietary information that is protected by copyright. All rights
are reserved. No part of this document may be reproduced, translated to another lan-
guage or stored in a retrieval system, or transmitted by any means, electronic,
mechanical, photocopying, recording, or otherwise, without prior written permission.
Windows is a registered trademark of Microsoft, Inc.
Other brand or product names are trademarks of their respective holders.
Important Recycle Instruction:
LCD Lamp(s) inside this product contain mercury. This product may contain
other electronic waste that can be hazardous if not disposed of properly. Recycle or
dispose in accordance with local, state, or federal Laws. For more information,
contact the Electronic Industries Alliance at WWW.EIAE.ORG. For lamp specific
disposal information check WWW.LAMPRECYCLE.ORG.
1
Table of Contents
Usage Notice
Precautions ................................................................................. 2
Introduction
About the Product ....................................................................... 3
Package Overview ...................................................................... 4
Installation
Product Overview........................................................................ 5
Start Your Installation .................................................................. 8
User Controls
Front Panel Controls ................................................................... 10
How to Use the OSD Menus ....................................................... 11
On-Screen Display Menus.......................................................... 12
Appendices
Troubleshooting ........................................................................... 14
Warning Signal ............................................................................ 15
Product Dimensions.................................................................... 16
Compatibility Modes ................................................................... 17
2
Usage Notice
Warning- To prevent the risk of fire or shock hazards, do not
expose this product to rain or moisture.
Warning- Please do not open or disassemble the product as this
may cause electric shock.
Precautions
Follow all warnings, precautions and maintenance as recommended
in this user’s manual to maximize the life of your unit.
Do:
q Turn off the product before cleaning.
q Use only a dry soft cloth or clean room wiper when cleaning the
LCD Display screen surface.
q Use a soft cloth moistened with mild detergent to clean the display
housing.
q Use only a high quality and safety approved AC/DC power adapter.
q Disconnect the power plug from the AC outlet if the product is not
going to be used for an extended period of time.
Don’t:
q Do not touch the LCD Display screen surface with sharp or hard
objects.
q Do not use abrasive cleaners, waxes or solvents for your cleaning.
q Do not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- Place in direct sunlight.
3
Introduction
About the Product
Having a 23.1” LCD dsiplay with an active matrix, thin-film transistor (TFT)
liquid crystal display (LCD), this product also demonstrate the following
outstanding features.
q
q
Analog and Digital dual signal input
Composite and S-Video signal input
q USB port connectivity
q
23.1” diagonal screen size
q 1920 x 1200 high resolution
q Wide Viewing Angle Technology
q 30 ~ 95 kHz horizontal scan
q 60 ~ 85 Hz refresh rate
q Auto Adjustment capability
q PIP (Picture-in-Picture) and PAP (Picture-and-picture) capability
q High quality full screen re-scaling capability
q Multiple aspect ratio selection (Native,Full,Aspect,Panorama)
q Internal power adaptor
q VESA DPMS power saving
q Built-in speaker for multimedia application
q Kensington lock capability
4
Package Overview
LCD Display
Power Cord
VGA Signal Cable
S-Video Cable
Audio-In Cable
DVI-D Cable
Landing Strip
Video Cable
User’s Guide
USB Upstream Cable
Family Product CD
5
Installation
Product Overview
u
Front View
Liquid Crystal Display
(LCDDisplay)
Fron Panel
t
Controls
Stand
u
Back View
USB Ports
Connector Ports (Inside the back cover)
Audio
DVI Input
Port
S-Video
AC-In
Composite
Video
Analog
Input Port
6
u
Tilt
Grasp the LCD Display with both hands and adjust the tilt as desired.
Tilt Angle:-5° ~ 20°
u
Kensington Security Slot
The monitor can be secured to your desk or any other fixed object with
Kensington lock security products. Kensington lock is not included.
Kensington Security Slot
7
u
VESA Mount on your monitor
This monitor conforms to the VESA Flat Panel Mounting Physical
Mounting Interface Standard which defines a physical mounting interface
for flat panel monitors, and corresponding standards for flat panel monitor
mounting devices, such as wall and table arms.The VESA mounting
interface is located on the back of your monitor.
The VESA Mounting slots of this model are located inside the rear cover
(shown in the following figure).
To mount the monitor on a swing arm or other mounting fixture, follow
the instruction included with the mounting fixture to be used.
Slots
100mm
100mm
VESA
Mounting
Interface
Warning!
Please select the proper screws!
The depth from plastic back cover to the bottom of the screw hole is
8mm.The spec is M4 screw.
8
Start Your Installation
u
Connecting the Display (Figure 10.1)
To setup this display, please refer to the following figure and procedures.
1. Be sure all equipment is turned off.
2. Connect the DC power cord to the power connector; plug one end of the
AC power cord into the power adapter, and the other end into an
electrical outlet(Œ).
3. For the PC with Analog output: Connect the VGA signal cable from
display VGA input connector to the 15-pin connector of your host
computer and tighten the screws().
4. For the PC with DVI digital output: Connect the DVI signal cable to the
connector of the display card in your computer; connect the other side to
the DVI-D input port of your display. Tighten the screws(Ž).
5. If your video source uses a round, four-prong S-Video connector,
please use the S-Video cable().
6. If your video source uses a round, one-prong composite video connector,
please use the video cable().
7. If your audio source uses a round, one-prong composite audio connector,
please use the audio cable(‘).
8. Turn on your computer, display and video source.
Notice:To ensure the LCD Display will work well with your computer,please
configure the display mode of your graphics card to make it less than or
equal to 1920 x 1200 resolution and make sure the timing of the display
mode is compatible with the LCD screen. We have listed the “Compatibility
Modes” of this LCD screen in appendices for your reference.
9
Figure 10.1
‘
Ž
Œ
10
User Controls
Front Panel Controls
Œ
‘
Ž
No/Icon
Control
Function
❶ MENU Menu button
To Enter / Exit the OSD menus.
1.To activate the"Auto Adjustment"
function to obtain an optimum image.
1. Auto
❷ SELECT
2. Select
2.To Select the adjustment items
from the OSD menu.
1.Enters the Brightness OSD menu.
2.Allows you to highlight and adjust
items in the OSD menu.
1. Brightness
2. Adjust
❸
❹
▼
▲
1. To turn the volume On / Off.
2. Allows you to highlight and
adjust items in the OSD menu.
1. Mute
2. Adjust
1. Green indicates the display is
turned on.
2. Amber indicates the display is in
power-save mode.
Power LED
❺
❻
Switches On / Off power to the
LCD display.
Power switch
11
How to Use the OSD Menus
1. Press the “MENU” button to pop up the on-screen menu and to
select among the six Main Menus.
2. Choose the adjustment items by pressing the “SELECT” button.
3. Adjust the value of the adjustment items by pressing the “
or “ ” button.
”
4. After a period of inactivity the OSD menus will automatically
disappear.
12
On-Screen Display Menus
1. VGA / DVI Input
Main Menu Menu Level 2 Menu Level 3
Function Description
To adjust the sound volume.
To adjust the contrast of the image
Volume
Contrast
1. To adjust the color temperature.
2. Allows you to adjust the red, green and blue colors of the display.
Color
1. PIP Mode On/Off.
2. Allows you to select PIP, PAP model.
PIP Mode
Source
Size
Allows you to select Video, and S-Video
PIP
Allows you to adjust size of display.
H. Position
V. Position
Allows you to move the horizontal position of the PIP window.
Allows you to move the vertical position of the PIP window.
Allows you to select VGA, DVI, Video, and S-Video model.
Source
Used to size the image being displayed in several different ways.
Aspect Ratio Native:Displays the incoming image as it is. Full:Resizes the image to fill
the the whole screen. Aspect:Fill to aspect ratio.
Changes the displays data frequency to match the frequency of your
Clock
graphics card. When you experience a vertical flickering bar,use this
function to make an adjustment.
Image
Synchoronizes the signal timing of the display to that of the graphics
card. When you experience an unstable to flickering image,use this
function to make an adjustment.
Phase
Advanced
H. Position
V. Position
Language
Time-out
Changes the horizontal position of the image.
Changes the vertical position of the image.
Allows you to choose the OSD menu language.
To adjust the amount of time the OSD menu is to remain displayed.
Allows you to move the horizontal position of the OSD window.
Allows you to move the vertical position of the OSD window.
Display the timing mode.
OSD
H. Position
V. Position
Information
Reset
To return the display parameters of the current mode to their fatory
default settings.
13
2. Video Input
Main Menu Menu Level 2 Menu Level 3
Function Description
To adjust the sound volume.
To adjust the contrast of the image
Volume
Contrast
Allows you to adjust the Saturation, Tint, Flesh Tone and Black Level of
the display.
Color
1. PIP Mode On/Off.
2. Allows you to select PIP, PAP model.
PIP Mode
Source
Allows you to select Video, and S-Video
PIP
Size
Allows you to adjust size of display.
H. Position
V. Position
Allows you to move the horizontal position of the PIP window.
Allows you to move the vertical position of the PIP window.
Allows you to select VGA, DVI, Video, and S-Video model.
Adjusts the sharpness of the image.
Source
Sharpness
Used to size the image being displayed in several different ways.
Native:Displays the incoming image as it is.
Image
Aspect Ratio Full:Resizes the image to fill the the whole screen.
Aspect:Fill to aspect ratio.
Panorama:Non-linear scaling is available for aspect ratio conversion.
Noise Reduction Noise reduction is implemented noise reduction filters to the video data.
Language
Time-out
Allows you to choose the OSD menu language.
Advanced
To adjust the amount of time the OSD menu is to remain displayed.
Allows you to move the horizontal position of the OSD window.
Allows you to move the vertical position of the OSD window.
Display the timing mode.
OOSD
H. Position
V. Position
Information
Reset
To return the display parameters of the current mode to their fatory
default settings.
14
Appendix
Troubleshooting
If you are experiencing trouble with the LCD display, refer to the
following trouble shooting. If the problem persists, please contact
your local dealer or our service center.
Problem: No image appears on screen.
Check that all the I/O and power connectors are correctly and
well connected as described in the “Installation” section.
4
Make sure the pins of the connectors are not crooked or broken.
4
Problem: Partial image or incorrectly displayed image.
Check to see if the resolution of your computer is higher than that of the
LCD Display.
4
Reconfigure the resolution of your computer to make it less than or equal
4
to 1920 x 1200.
Problem: Image has vertical flickering line bars.
Use “Clock” to make an adjustment.
4
Check and reconfigure the display mode of the vertical refresh rate of your
graphics card to make it compatible with the LCD Display.
4
Problem: Image is unstable and flickering
Use “Phase” to make an adjustment.
4
Problem: Image is scrolling
Check and make sure the VGA signal cable (or adapter) is well connected.
4
Check and reconfigure the display mode of the vertical refresh rate of
your graphics card to make it compatible with the LCD Display.
4
Problem: Vague image (characters and graphics)
Use “Clock” to make an adjustment. If this problem still exists,
use “Phase” to make an adjustment.
4
15
Warning Signal
Sometimes you may see warning messages for this LCD Display.
This means that the LCD Display cannot correctly receive the signal
from the computer graphics card.
No Input Signal
4
4
This message means that the LCD Display has been powered on but it
cannot receive any signal from the computer graphics card. Check all the
power switches, power cables, and VGA signal cable.
Signal Out Of Range
This message means that the signal of the computer graphics card is not
compatible with the LCD Display. When the signal is not included in the
compatibility mode we have listed in the Appendices of this manual, the
LCD Display will show this message.
16
Product Dimensions
Front View
Side View
Top View
17
Compatibility Modes
V. Frequency
(Hz)
H. Frequency
(kHz)
Mode
Resolution
IBM VGA
640 x 350
720 x 400
70.00
70.08
59.94
75.00
85.00
60.31
75.00
85.06
60.00
75.02
84.99
75.00
85.00
60.02
75.02
85.02
60.00
59.85
74.77
84.84
59.93
59.95
59.95
31.46
31.46
31.46
37.50
43.26
37.87
46.87
53.67
48.36
60.02
68.67
67.50
77.09
63.98
79.97
91.14
75.00
44.77
56.45
64.39
66.58
65.29
74.03
IBM VGA
VESA DMT
VESA DMT
VESA DMT
VESA DMT
VESA DMT
VESA DMT
VESA DMT
VESA DMT
VESA DMT
VESA DMT
VESA GTF
VESA DMT
VESA DMT
VESA DMT
VESA DMT
VESA CVT
VESA CVT
VESA CVT
VESA CVT
VESA CVT
VESA CVT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1152 x 864
1280 x 1024
1280 x 1024
1280 x 1024
1600 x 1200
1280 x 720
1280 x 720
1280 x 720
1920 x 1080
1680 x 1050
1920 x 1200
Planar Systems,Inc.
Customer Service
Email : PlanarSupport@planar.com
Tel : 1-866-PLANAR-1 (1-886-752-6271)
Hours : M-F, 8am-8pm Eastern Time (5am-5pm Pacific Time)
©2006 Planar Systems, Inc. Planar is a registered trademark of Planar Systems, Inc.
Other brands and names are the property of their respective owners.
Technical information in this document is subject to change without notice.
|